Corners, edges and cavities are no obstacle for our angle professional. All areas that are difficult to access can be easily processed with our WH-1 angle handpiece.
The low weight and ergonomic format allow time-consuming work processes in any position. Thus the desired final result is achieved quickly and easily in a comfortable way.

The integrated motor cooling can reduce the heat development to a maximum by using the handpiece for an unlimited period of time, thus considerably increasing the service life of the motor and the collet system.
The illuminated micro switch in the centre of the handpiece ensures safe and ergonomic working at all times.

• 90° angle
• Illuminated on/off switch
• Low weight and quiet run
• Speed range from 1,000 - 30,000 rpm
• Ergonomic working due to innovative design
• High grip of the handpiece surfaces
• Internal engine cooling

• Speed: 30.000 rpm
• Brushless DC motor
• Torque: 8.9 Ncm
• Collets: ⌀ 1.6 mm - 2.35 mm - 3 mm - 1/8"
• Concentricity accuracy: <0.02 mm
• Diameter: max. 27 mm
• Weight: 210 g
• Length: 167 mm

• WH-1 90° handpiece with 3 mm collet + collet pin
• Motor cable
• Collet wrench set 45° / 90°
• Instruction manual

Corners, edges and cavities are no obstacle for our angle professional. All areas that are difficult to access can be easily processed with our WH-1 angle handpiece.
The low weight and ergonomic format allow time-consuming work processes in any position. Thus the desired final result is achieved quickly and easily in a comfortable way.

The integrated motor cooling can reduce the heat development to a maximum by using the handpiece for an unlimited period of time, thus considerably increasing the service life of the motor and the collet system.
The illuminated micro switch in the centre of the handpiece ensures safe and ergonomic working at all times.

• Speed: 30,000 rpm
• Brushless DC motor
• Torque: 7.8 Ncm
• Collets: ⌀ 1.6 mm - 2.35 mm - 3 mm - 1/8"
• Concentricity accuracy: <0.02 mm
• Diameter: max. 28 mm
• Weight: 185 g
• Length: 150 mm

Corners, edges and cavities are no obstacle for our angle professional. All areas that are difficult to access can be easily processed with our WH-1 angle handpiece.
The low weight and ergonomic format allow time-consuming work processes in any position. Thus the desired final result is achieved quickly and easily in a comfortable way.

The integrated motor cooling can reduce the heat development to a maximum by using the handpiece for an unlimited period of time, thus considerably increasing the service life of the motor and the collet system.
The illuminated micro switch in the centre of the handpiece ensures safe and ergonomic working at all times.